Publicidad
Idiomas disponibles
Idiomas disponibles
This option allows you to lock the buttons
on the control panel so children
cannot
accidently
start the dishwasher
by pressing
the buttons
on the
panel.
To lock
and unlock
the buttons
on the control
panel, hold the Child Lock
button down for three (3) seconds.
When Power is On : Hold down the Child
Lock button
for three (3)
seconds.
When Power is Off : Push the Power button first, and then hold down
the Child
Lock button for three (3) seconds.
Delay a cycle for up to 24 hours in one-hour
increments.
The hour displayed
indicates
the time at which the wash will be started.
Displays wash information,
Delay Start hours, and Error messages.
If an error occurs
during an operation,
an error message
is displayed
with a
warning
sound. Refer to the information
codes page. (see page 25)
To start the cycle, press the Start/Drain
button
before closing the door.
To cancel a cycle currently
running and drain the dishwasher,
hold down
Start/Drain
buttons
for three (3) seconds.
7}
ou can select options
(Delay Start, Sanitize, Half Load, or Storm Wash) before starting
a cycle. If you
change the cycle after selecting
an option, the original cycle is reset.
_7}To
prevent
touchpad
losing response
sensitivity,
the
from
follow these instructions:
Touch the center of each keypad
using one finger. Do not push.
Clean the touch
control's
surface
regularly with a soft, damp cloth.
Be careful not to touch
more than one touch
key pad at a time, except as directed.
setting
up your _dishwasher
9
Publicidad
