Tabla de contenido
Publicidad
Mechanical
•
Always make sure the power switch is in its "OFF" position.
Disconnect the spark plug wire, and allow the engine to
completely cool before carrying out maintenance.
•
Check for damaged parts. Before using the generator, any part
that appears damaged should be carefully checked to determine
that it will operate properly and perform its intended function.
Check for alignment and binding of moving parts, any broken
parts or mounting fixtures, and any other condition that may
affect proper operation technician.
•
The generator is designed with guards for protection from
moving parts. In any case, care must still be taken to protect
personnel and equipment from other mechanical hazards when
working around the generator.
•
Do not operate the generator with safety guards removed. While
the generator is running, do not attempt to reach around the
safety guard for maintenance or any other reason.
•
Keep hands, arms, long hair, loose clothing, and jewelry away
from moving parts. Be aware that when engine parts are moving
fast they cannot be seen clearly.
•
Keep access doors on enclosures closed and locked when
access is not required.
•
When working on or around the generator always wear
protective clothing including ANSI approved safety gloves, safety
eye goggles, and safety hat.
•
Do not alter or adjust any part of the generator that is assembled
and supplied by the manufacturer.
•
Always follow and complete scheduled engine and generator
maintenance.
Chemicals
•
Avoid contact with hot fuel, oil, exhaust fumes, and hot solid
surfaces.
•
Avoid body contact with fuels, oils, and lubricants used in the
generator. If swallowed, seek medical treatment immediately. Do
not induce vomiting if fuel is swallowed. For skin contact,
immediately wash with soap and water. For eye contact,
immediately flush eyes with clean water and seek medical
attention.
1-9
Publicidad
Tabla de contenido
