Headphone Jack; Aux Input Jack; Product Specifications - Bigben MCD11 Instrucciones De Funcionamiento

Headphone jack

The unit is equipped with a HEADPHONE JACK for private listening. Simply plug any 3.5 mm plug
type stereo headphone into the HEADPHONE JACK. With the headphone connected the speaker in
the unit will be automatically disconnected.

AUX input jack

1. Plug in the Aux Cable and conect the other end to an Audio Playing Device.
2. Power on the unit by pressing the
The LCD display will show "AUX" to indicate.
3. Start Playing from your Audio Playing Device. For instructions on how to play from your Audio
Playing Device, please refer to its own manual.
Product specifications (basic CD version)
• Input: 100-240V ~ 50/60Hz 0.3A
• Output: 5V
1.5A
• Frequency ranges: FM: 87.5 – 108Mhz
• Clock Backup: 2 X 1.5V, AAA, LR03
Product specifications (USB version)
• Input: 100-240V ~ 50/60Hz 0.3A
• Output: 5.9V
• USB output: DC5V
• Frequency ranges: FM: 87.5 – 108Mhz
• Remote Backup: 1 X 3V, CR2032
WARNING! Risk of hearing impairment
• Set a low volume on the playback device before connecting the headphones to the
sound source.
• Avoid excessive volume, particularly over extended periods or frequent use. Excessive
volume can result in permanent hearing impairment.
ABOUT THE DISKS
Handling
Do not touch the underside of disks.
Hold disks by the edges to avoid leaving fingerprints on the surface.
Any dust, fingerprints or scratches may cause a malfunction.
Never affix a label or sticky tape to the disk.
Storage
Put disks back in their case after use.
Never expose disks to direct sunlight or heat sources. Never leave disks inside a
car parked in full sunlight.
Cleaning
Use a clean, soft, lint-free cloth to clean the disk, working from the centre outwards
in a straight line. Do not use solvents such as petrol, thinners, commercially
available cleaners or antistatic sprays for vinyl disks.
1.5A
100mA
button and press it repeatedly to select the "AUX" function.
- EN 7 -