Led Indicators - Axis P1353-E Guia De Instalacion

AXIS P1353-E/P1354-E Installation Guide

LED indicators

LED Color
Network Green
Amber
Unlit
Status Green
Amber
Red
Power Green
Amber
Status LED when using the Focus Assistant
LED Color
Green
Amber
Red
Status LED on housing electronics (fan/heater)
LED Color
Power Green
Flashing
green
Indication
Steady for connection to a 100 Mbit/s network. Flashes for network activity.
Steady for connection to 10 Mbit/s network. Flashes for network activity.
No network connection.
Steady green for normal operation.
Note: The Status LED can be configured to be unlit during normal operation, or to
flash only when the camera is accessed. To configure, go to Setup > System
Options > LED settings. See the online help files for more information.
Steady during startup, during reset to factory default or when restoring settings.
Slow flash for failed upgrade.
Normal operation.
Flashes green/amber during firmware upgrade.
Indication
Step 4: Focus Assistant is enabled
Step 6: The lens is optimally adjusted
Step 4: The camera has been moved, or an object has been inserted in front of
the lens. Exit and restart the Focus Assistant.
Step 6: The lens is less optimally adjusted
Step 4: The camera has been moved, or an object has been inserted in front of
the lens. Exit and restart the Focus Assistant.
Step 6: The lens is poorly adjusted
Indication
OK
Single flash: Heater error
Double flash: Fan error
Triple flash: General error
Note: Alarm events will be triggered through the camera's input port. See the
User Manual, available on www.axis.com Contact your Axis reseller for
information about spare parts and troubleshooting.
Page 17