Charmglow 810-2320-B Manual Del Propietário página 24

INS_810_2320_B_Charmglow-new.qxd
23
10/6/04 5:22 PM
Door Hinge Pin Holes
Locking Caster
Hex Nut Wrench
Page 25
Choose a good, cleared assembly
area and get a friend to help you put
your grill together. Lay cardboard
down to protect grill finish and
assembly area.
C A U T I O N ! Some parts may
Step 1
Attach cart base to side panels.
Insert four M6 X 12mm bolts (silver)
through cart base and into legs and
tighten securely. Be sure the door
hinge pin holes face forward.
Step 2
Attach back panel to legs using
four M6 X 12mm bolts (silver).
NOTE:
With the help of a friend, turn
the cart assembly over. Try to
minimize the stress to the
l e g s .
Step 3
Attach locking casters to the bottom
of the legs. Tighten caster bolts
securely using hex nut wrench
provided in parts pack.
contain sharp edges.
Wear protective
gloves if necessary.