Charmglow BAR ISLAND 814-6810-0 Manual Del Propietário página 3

Make sure you have all items listed under PARTS LIST and PARTS CARD CONTENTS before
you begin the installation process. Your Parts Card will include:
1 Screwdriver
Qty.
4 M8 Full Thread Studs
4 M8 Washers
M8 Full Thread Studs
(2) Bolts
PARTS CARD CONTENTS
Removable
Side Panel
Attached
foot rest
(2) Bolts
2 M6 x 12mm Bolts
4 M8 Nuts
Screwdriver
M6 x 12mm Bolt
M8 Washers
M8 Nuts
ASSEMBLY STEPS
Choose a good, cleared assembly
area and get a friend to help you
put your bar island together.
Step 1
Remove the two M6 x 12mm
bolts from the side panel. Then
set the panel aside in a clear
area.
Note: Keep these two bolts as
they will be used in Step 7.
Note: With the help of a friend, lay
the bar island on open side.
Step 2
Remove the two M6 x 12mm bolts
holding the foot rest to the side
panel. Attach the foot-rest onto the
bar island base by using four
M6 x 12mm bolts. (Includes 2 bolts
previously removed) Then stand
the unit in the up-right position.
2 2