Publicidad
Enlaces rápidos
ASSEMBLY INSTRUCTIONS
INSTRUCCIONES DE MONTAJE
Hand Truck
Table of Contents:
Parts List ..................................... 2
Assembly Instructions ............2-5
Warranty Information .............. 6
Carretilla
de mano
Índice de contenidos:
Lista de piezas ............................ 2
Instrucciones de montaje ........ 2-5
For safe, efficient product use, Magline recommends inspecting
equipment regularly and replacing damaged components immediately.
Para que su producto sea seguro y eficiente, Magline recomienda
inspeccionar el equipo regularmente, y cambiar los componentes
defectuoso inmediatamente.
www.magliner.com
Publicidad
Resumen de contenidos para Magliner Hand Truck
-
Página 1: Tabla De Contenido
ASSEMBLY INSTRUCTIONS INSTRUCCIONES DE MONTAJE Hand Truck Table of Contents: Parts List ........2 Assembly Instructions ....2-5 Warranty Information ....6 Carretilla de mano Índice de contenidos: Lista de piezas ......2 Instrucciones de montaje ..2-5 Información sobre la garantía .. 6 For safe, efficient product use, Magline recommends inspecting equipment regularly and replacing damaged components immediately. -
Página 2: Parts List
PARTS LIST TOOLS REQUIRED • (2) 1/2” COMBINATION ITEM DESCRIPTION QTY. PART NO. WRENCH OR SOCKET • (1) #3 PHILLIPS Frame (with black caps) Varies SCREWDRIVER Handle Varies • (1) HAMMER RH Wheel Bracket 210100 • (1) PLIERS LH Wheel Bracket 210101 •... - Página 3 Stair Climbers are optional. If used, please refer to the instructions provided with them now. If Stair Climbers ARE NOT used, continue with the following general hand truck assembly instructions (Step g.). g. Position and attach the left hand wheel bracket sliding it over the axle to the outside of the frame leg, using two (2) 5/16"-18 hex head locknuts to secure it. Do Not Tighten The (2) Nuts At This Time! Refer to Figure 2 (page 4).
- Página 4 Figure 2 Figure 3 (for 8” wheels) (for 10” wheels) Ilustración 3 Ilustración 2 Figure 4 For Extruded Noses please follow instructions provided in nose kit. Ilustración 4 Para frontales extruidos, siga las instrucciones indicadas para el kit del frontal. “Recessed”...
- Página 5 Place black frame caps on frame. Position the handle between the frame rails and line up holes. Fasten with four (4) 1/4”-20 pan head screws and hex head locknuts. Securely tighten (1/4”-20 screws to 50-60 in.-lbs. torque). YOU ARE NOW READY TO PUT YOUR MAGLINER HAND TRUCK TO WORK. MONTAJE DE LA MANIVELA (Consulte ilustración 5) PASO 3: a.
-
Página 6: Warranty Information
People have trusted the Magline name for more than half a century. For El nombre Magliner es sinónimo de confianza desde hace más de medio siglo. performance, durability, and safety, you’ll discover what millions of route En material de rendimiento, durabilidad y seguridad, descubrirá...