Ikegami ISD-A15S Manual Del Usuario página 10

⑤ Video output terminal (VIDEO OUT)
To be used to give out the video signal. Connect this to the video input
terminal of a monitor, switcher etc. (To be terminated with 75-ohm
impedance.)
⑥ Power indicator (POWER)
The LED indicator stays on in green while the camera power is on.
⑦ DC12V/AC24V power input terminal
Keep the input power at DC10.5-15.0 V or AC24V±10%.
* This installation should be made by a qualified service person and
should conform to all local codes.
⑧ - ⑨ Camera setup function switches
Please refer to the Operation Procedure chapter.
E-5