Troubleshooting; Optional Accessories - Makita PDC1200 Manual De Instrucciones

TROUBLESHOOTING

Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual,
do not attempt to dismantle the tool, machine, or unit. Instead, ask Makita Authorized Service Centers, always using
Makita replacement parts for repairs.
State of abnormality
The tool or machine does
not start.
Charging does not start
when the charger is
connected.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
Main power lamp
-
The lamp lights up in
green.
The lamp blinks in green.
The lamp blinks in red and
green alternately.
The lamp does not light
up.
The lamp blinks in red.
The lamp blinks in red and
green alternately.
The lamp does not light
up.
Cause
The charger is connected to the unit.
The adapters are not installed to the
tool or machine.
The tool or machine, or the cords of
the adapters are overheated.
The tool or machine, or the unit is
broken.
The plug of the adapter or power
tool/machine and the socket of the
battery are not connected.
The unit is overheated, or the tem-
perature of the unit is low.
The remaining battery capacity is
not enough.
The unit has detected an
abnormality.
The tool or machine, or the unit is
broken.
The unit is not turned on.
The remaining battery capacity is
not enough.
The unit is broken.
The unit is overheated, or the tem-
perature of the unit is low.
The unit or charger has detected an
abnormality.
The unit or charger is broken.
The charger is not connected to the
proper AC voltage source.
The socket of the charger is not
connected properly.
The power cord of the charger is not
connected to the charger properly.
The unit or charger is broken.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Makita genuine charger
• Adapters for 36 V (18 V x 2)
• Adapter for 36 V - 40 Vmax
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
17 ENGLISH
Remedy
Remove the charger from the unit.
Install the adapters to the tool or
machine.
Check that the adapters are installed
securely.
Cool down the tool or machine, unit
and adapter. After cooling down,
power off and then power on again.
Ask Makita Authorized Service
Centers for repair.
Connect the plug and the socket.
Check that the plug and socket are
connected securely.
Cool down the unit, or warm up
the unit.
Charge the battery.
Turn off the unit, and then back on.
Ask Makita Authorized Service
Centers for repair.
Turn on the unit.
Charge the battery.
Ask Makita Authorized Service
Centers for repair.
Cool down the unit, or warm up
the unit.
Remove the socket of the battery
charger, and then connect it again.
Ask Makita Authorized Service
Centers for repair.
Connect the charger to the proper
AC voltage source.
Connect the socket of the charger
properly.
Connect the power cord to the
charger properly.
Ask Makita Authorized Service
Centers for repair.