Activating The Automatic Or Manual Setting Mode By The Remote; Control Series Tm2 X Ts - FAAC TM2 X SW Manual De Instrucciones

ACTIVATING THE AUTOMATIC OR MANUAL SETTING MODE BY THE
The manual mode (wind only), or automatic mode
(wind + sun) setting has to be done by the TM2 X
TS-1 or TM2 X TS-7 remote control.
Using the front buttons on the remote control do the following:
TM2 X TS-1
By pressing briefly one button the display will show
the current setting.
To change setting, press for at least 3 seconds the button related to the desired
function, till the motor fedback.
TM2 X TS-7
By pressing briefly the button the display will show
the current setting.
To change setting press the same button for at least 3 seconds till the motor
feedback.
TM2 X SW
REMOTE CONTROL SERIES TM2 X TS
or
(3 sec)
(3 sec)
25
Wind & Sun sensor
activate.
Only Wind sensor
activate.
Activating
Deactivating
Activating/ Deactivating
A4518_6H80_Rev.A