Computer Operation - SPORTSTECH CX608 Manual De Usuario

Functional buttons:
MODE - Push down for selecting functions
SET - To Set the consumer movement of time, distance, calories and hand pulse.
RESET - For resetting consumer movement of time, distance, calories and hand pulse.
Function and operations:
SCAN - Press "MODE" button until "SCAN" appears, monitor will rotate through all the 6 functions: Time, speed,
distance, calorie, odometer and pulse. Each display will be hold 6 seconds.
TIME - (1) Count the total time from exercise start to end. (2) Press "MODE" button until "TIME" appears, press "SET"
button to set exercise time. When the "set" is zero, the computer will alarm 10 seconds.
SPEED - Display current speed.
DISTANCE - (1) Count the distance from exercise start to end. (2) Press "MODE" button until "DIST" appears. Press
"SET" button to set exercise distance. When the "set" is zero, the computer will alarm 10 seconds.
CALORIES - (1) Count the total calories from exercise start to end. (2) Press "MODE" button unit "CAL" appears.
Press "SET" button to set exercise calories. When the "set" is zero, the computer will alarm 10 seconds.
ODOMETER - Monitor will display the total accumulated distance.
PULSE - Press MODE button until "PULSE" appears. Before measuring your pulse rate, please place your palms
of your hands on Both of your contact pads and the monitor will show your current heart beat rate in beats per
minute(BPM) on the LCD after 6~7 seconds. Remark: During the process of pulse measurement, because of the
contact jamming, the measurement value may be higher than the virtual pulse rate during the first 2~3 seconds, then
will return to normal level. The measurement value can not be regarded as the basis of medical treatment.
Press "MODE" button until "PULSE" appears. Press "SET" button to set exercise pulse. The setting values of 40-240
RPM , the consumer computer alarm when heart rate is above the SET value.
NOTE:
1. If the display is faint or shows no figures ,please replace the batteries.
2. The monitor will automatically shut off if there is no signal received after 4 minutes
SPECIFICATIONS
FUNCTION
BATTERY TYPE
OPERATING TEMPERATURE
STORAGE TEMPERATURE

COMPUTER OPERATION

AUTO SCAN
TIME
CURRENT SPEED
TRIP DISTANCE
CALORIES
ODOMETER
PULSE RATE
40
Every 6 seconds
0:00'~99:59'
0.0~999.9 KM/H (MILE/H)
0.00~999.9 KM (MILE)
0.0~999.9 CAL
0.0 ~ 9999 KM (MILE)
40~240 BPM
2pcs of SIZE –AAA or UM –4
0°C ~ +40°C
-10°C ~ +60°C