Purchased Parts Package; Technical Data Flow Sensor Type Cmf/Asf (Type A1) - Zenner zelsius C5-CMF Manual De Montaje E Instrucciones

Español Italiano
Be sure to read the installation and
operating manual before installing.
This allows you to protect yourself

Purchased parts package

■
zelsius C5 measuring capsule with calculator
®
■
O-Ring respectively gasket
■
Seal material
■
Wall holder with mounting accessories
■
Installation and operating manual

Technical data flow sensor Type CMF/ASF (type A1)

(specification for symmetrical installation of temperature sensor)
Nominal flow q
p
Maximum flow q
s
Minimum flow q CMF
i
Minimum flow q ASF
i
Starting flow horizontally ca.
Pressure loss at q
Temperature range CMF
Temperature range ASF
Minimum pressure (to avoid cavitation)
Measurement accuracy class
Connecting point (*)
Nominal pressure
Nominal diameter
Installation position
Installation
Cable length up to calculator
(in combi version)
Installation place temperature sensors
Heat carrier
(*) optionally
Instruction for flow meters with asymmetric temperature sensor installation and flow
sensor with integrated temperature sensor:
■ When installing the flow sensor in an MID sensor pocket (immersion sleeve) rated
limits of the line „Pocket" listed on the name plate apply.
■ For direct install of the flow sensor in a ball valve which listed on the rated limits of
the line "direct" listed on the nameplate apply.
p
and prevent damage. Check the
contents of the package before ins-
tallation to be complete.
m³/h 0.6
m³/h 1.2
l/h 24
l/h 24
l/h
5
bar
°C 10 °C ≤ Ɵq ≤ 90 °C
°C 15 °C ≤ Ɵq ≤ 90 °C
bar
IST, TE1, A1, PCC, M60
PS/PN
depending on the connecting
DN
horizontally or vertically
no upside down installation
return flow, optionally forward flow
m
1.5 2.5
3.0 5.0
30 / 60 50 / 100
60 100
5 7
≤ 0,25 bar
0.3
3
16
interface
1.2
optional
water
19