Kalorik EKP 43255 Manual De Instrucciones página 4

Fax +1 305 430 9692

PARTS
1. Power Dial (On/Off)
2. Heating surface
BEFORE THE FIRST USE
 Place on a dry, flat, level, and heat-resistant surface and close to
an electric socket.
 For proper ventilation provide at least 4-6 in (10-15 cm) of space
above and around the appliance.
 Make sure the temperature dial (4) is set in "0" position, and that
the power dial (1) is set to "OFF", before plugging in.
 Plug into a 120 Volt A.C. wall outlet.
 Turn the ON/OFF knob to the ON position by turning clockwise.
 The invisible protective coating must be removed before you can
use the appliance. To do this, set the controls to the maximum
setting and heat at the "5" level for approximately 10 minutes.
Smoke may develop, so make sure that the room is ventilated.
 Set the temperature dials to "0", switch off the cooking plate with
the power dial and allow cooling down completely. The cooking
plate is now ready for use.
 Keep the surface of the heating element (2) clean and dry.
Copies of the I/B. Please reproduce them without any
changes except under
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
what is inside the frame.
3. Indicator light
4. Temperature dial
4
Assembly page 4/24
special instruction from
Print only
EKP 43255 - 120501
Team