Marking Lines
As a first step,proceed with the following drawings:
• A vertical line up to the ceiling or up to the upper limit, at the centre of the area in
which the hood is to be fitted.
(A) A horizontal line A, 650-750 mm above the hob.
(B) A horizontal line B at a minimum 930-1030 mm above the cooker top.
(C) A horizontal line C at a 132 mm above the B.
(D) A horizontal line D at 448-783 mm above the cooker hood.
Mark Points:
(1) Mark a point (1) on the horizontal line D, 60 mm to the vertical reference line.
Repeat this operation on the other side, checking that the three marks are leveled.
(2) Mark a point (2) on the horizontal line C, 60 mm to the vertical reference line.
Repeat this operation on the other side, checking that the three marks are leveled.
(3) Mark a point (3) on the horizontal line B, 80 mm to the vertical reference line.
Repeat this operation on the other side, checking that the three marks are leveled.
21
12
10
11
11
20
EN
27