Memory/Sd Card; Hot And Cold Markers - Beha-Amprobe IRC-120-EUR Manual De Instrucciones

Memory/SD Card

MENU
DOWN
To view saved images, navigate to the SD card icon in the menu. Most recent
images will appear first. Browse images by toggling up or down.
Note: Images cannot be deleted or renamed through the IRC-120 interface.
Make these modifications by installing the SD card in an alternate device such
as a computer.
The SD card comes installed in the product and will name saved photos in
numerical order from 0001-9999. Access the SD card through the movable
cover on the side of the product. Gently push on and release the SD card
to pop it out. Insert it into the SD card adapter and then into a computer
to download saved images. Saved images can also be downloaded with a
micro B USB cable (not supplied). Access the USB port below the SD card. The
product does not need to be powered on to download pictures through the
USB connection.
If you receive this error(
memory is full. If the images are renamed, the SD card may be able to store
more than 9,999 images.

Hot and Cold Markers

MENU
DOWN
Hot (red square outline) and cold (blue square outline) markers indicate the
locations of hottest and coldest areas within a target area.
C
O
UP ENTER
Figure 2.4
), either the SD card is not inserted or SD card
UP ENTER
Figure 2.5
10
C
O
BACK TO
MEASUREMENT
DOWN UP
BACK TO
MEASUREMENT
ENTER