Publicidad
STEP 2A
6
REMOVE TEMPLATE
15
Remove the wall plate template and discard.
12
(continued)
7
SECURELY TIGHTEN
16
17
4X
CAUTION:
Avoid potential personal injury or property damage!
17
All four lag bolts
MUST BE firmly tightened to prevent
unwanted movement of the wall plate
securely fastened to the wall before continuing on to the next step.
17
Install the four lag bolts
and firmly tighten until they are
pulled flush against the wall plate
16
. Ensure the wall plate is
16
.
Go to STEP 3 on PAGE 19.
Publicidad
