Mounting The Guard - EGO ST1500F Manual Del Usuario

MOUNTING THE GUARD

WARNING:
of the blade on the guard and protect your hands from being injured by the blade.
1. Remove the battery pack from the
trimmer.
2. Lift the trimmer head and face it
downward; align the two mounting
holes in the guard with the two bolts
that are preassembled on the base
of the shaft. Make sure that the
internal surface of the guard faces
towards the trimmer head (Fig. 4).
3. Lock the guard in place with the two
bolts and the supplied hex wrench
(Fig. 5).
Always wear gloves when mounting or replacing the guard. Be careful
56-VOLT LITHIUM-ION CORDLESS 15" STRING TRIMMER
4
5
15