Status Indicators; Care & Maintenance - Sound ID 300 Guía De Inicio Rápido Y Manual Del Usuario

Status Indicators

On/Off/Battery Level Indicator: Momentarily press the main button
and if the Green Status Light turns on, then the device is ON. If the Red
Status Light turns ON, then the device is ON but the battery is low and
should be charged soon as there is less than 30 minutes of battery life
remaining. No status light will show if the headset is off.
Connection Status: A momentary press of the main button can also
produce a "blinking green light" indicating that the Sound ID 300 is ON
and is searching for the handset. The search may take several seconds.
If the headset is already connected you will hear a beep and will not see
the blinking indicator.
Care & Maintenance
To keep your Sound ID 300 headset in best condition:
• Never leave it in direct sunlight, on a radiator, or in a closed car during
hot weather.
• Avoid improper handling.
• Never immerse your Sound ID 300 in any liquid. Avoid hair spray,
perfume, and sunscreens as they can cause damage to the housing
or electronic components.
• For the highest quality sound, you'll need to keep your Sound ID 300
clean and free from earwax. You can do this by removing the eartip
and washing it with warm water and mild soap. Rinse and be sure to
let it dry before use.
14