Connecting To Audio Devices; Pairing The Transmitter - connexx Smart Transmitter Guia Del Usuario

Connecting to audio devices

Use the supplied cables and adapters.
TO SL INK
Au dio In
Further information:
■
When using the TOSLINK cable:
□
Before connecting the cable, remove the protection
caps from the TOSLINK cable plugs.
□
To prevent the TOSLINK cable from breaking, do
not forcefully bend it.
□
Set the output format of the TV or audio
device to "uncompressed PCM audio"
(PCM = pulse-code modulation).
Compressed audio format (like surround sound)
is not supported by the transmitter. This will be
indicated by a flashing orange LED
■
If the two inputs of the transmitter are connected to
different audio devices, the device connected via
TOSLINK cable has the higher priority and the audio
6
TV

Pairing the transmitter

The remote control for your hearing instruments has to be
paired once with the transmitter.
X
.
signal of this device will be streamed to your hearing
instruments. The audio signal of the other device will
not be streamed.
Follow the instructions in the remote control's user
guide.
7