Local Codes; Preparing For Installation; Unpacking - Procom Heating MD100TBA Manual De Instalación Y Funcionamiento Del Propietario

Install and use heater with care. Follow all
local codes. In the absence of local codes,
use the latest edition of The National Fuel
Gas Code, ANSI Z223.1/NFPA 54*.
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
1 Batterymarch Park
Quincy, MA 02269-9101
Before beginning assembly or operation of the
product, make sure all parts are present. Com-
pare parts with package contents list. If any
part is missing or damaged, do not attempt to
assemble, install or operate the product. Con-
tact customer service for replacement parts.
1. Remove heater from carton.
2. Remove all protective packaging applied
to heater for shipping
6

LOCAL CODES

PREPARING FOR INSTALLATION

UNPACKING

www.usaprocom.com
State of Massachusetts: The installation
must be made by a licensed plumber or
gas fitter in the Commonwealth of Mas-
sachusetts.
Sellers of unvented propane or natural
gas-fired supplemental room heaters shall
provide to each purchaser a copy of 527
CMR 30 upon sale of the unit.
In the State of Massachusetts the gas
cock must be a T-handle type. The State
of Massachusetts requires that a flexible
appliance connector cannot exceed three
feet in length.
Front
Panel
Figure 1 - Vent-Free Gas Heater
3. Check heater for any shipping damage. If
heater is damaged, promptly inform dealer
where you bought heater.
Ignitor
Control
Button
Knob
Burner
Heater Cabinet
200000-01B
Grill