Monitor Audio TRIMLESS Serie Manual De Instalación página 17

装配自定义安装扬声器
围绕模板画线。如果有必
1
要，请标出中心线 模板
c u t o u t t e m p l a t e
Diameter: 170mm (6 11/16")
How to use this template:
1) Remove the Protective backing from the "low tack"
adhesive tape on rear of this template.
2) Align centre lines.
Template
3) The outside profile is an accurate indication of the speaker box hole required.
4) Draw around the profile, remove template and cut hole.
5) The template can be repositioned a number of times if required.
向下按端子，将裸线夹在通
3
孔中，以连接扬声器电线。
拧紧三握螺钉。
5
参考过度锁紧警告
围线标志线裁切
2
4
将扬声器导入挖孔中
装配格栅。用磁力固定，需
6
扣入到位固定。