Forward-Facing Installation With Latch - Graco READY RIDE Manual De Instrucciones

FORWARD-FACING
1
LATCH belt must be routed through
opening in child restraint for
(see page 29, fig. e
Belt must lay flat and not be twisted.
2
Adjust car seat to upright position (see fig. a
and page 25, fig. a
Place forward-facing
with LATCH anchors.
3
4
(fig. b). Pull connectors to be sure they are
securely attached (fig. c).
5
14
INSTALLATION WITH
forward-facing
LATCH belt
LATCH
6
Press down firmly in center of child restraint to
LATCH belt by pulling adjustment belt.
child restraint (fig. d).
7
tight and does not slip from the tightened
position. If it does not stay tight, try another
8
hardware (B) and tighten adjustment belt to
Belt must lay flat and not be twisted.
child.
(fig. e)
(A) to anchor
(fig. f).