Publicidad
Idiomas disponibles
Idiomas disponibles
XLC2+
Wall Mounting Your XLC2+
Wall mount your telephone as shown on the enclosed Quick Start
guide.
1. Follow the instructions in the Installation section on page 7 to
remove the base and handset from the base – steps 1, 4, 6.
2. Unplug the long phone line cord from the phone jack located on
the back of your XLC2+. Plug one end of the short phone line
cord into the same jack identified by LINE on the back of your
base.
3. Install the XLC2+ base onto the wall mount bracket as shown
on page 10. Guide the short phone cord through the wall mount
bracket as shown in the diagram.
4. Using a screwdriver, loosen the screws on your phone wall outlet
(1-2 turns).
5. Plug the loose end of the short phone cord into the wall phone
outlet.
6. Attach the wall mount bracket (with the XLC2+ base) onto the
wall phone outlet.
7. Plug the power adapter into a wall electrical outlet.
8. Pull the handset's battery tab located on the bottom of the
device in the direction of the arrow.
9. Place the handset in the base and allow 16 hours for full charge.
E
N
G
L
I
S
H
9
Publicidad
