Style selections 70106 Manual De Instrucciones página 5

ASSEMBLY INSTRUCTIONS
3. Place the mounting bracket (AA) in the open position.
Place the headrail of blind (C) against the back of the
mounting brackets (AA). Rotate the swivel arm of
mounting bracket (AA) to snap the locking tab. The blind
is locked when the push tab is against the headrail.
4. Snap valance clips (HH) onto headrail of blind (C).
Attach valance (A) to valance clips (HH).
Hardware Used
HH
Valance Clip
5. Hook wand (B) onto headrail of blind (C). Rotate the
wand (B) to the right or left to tilt the slats.
x 2 - 4
5
3
AA
4
HH
5
C
C
A
B