Establishing Connections En; Mf1, Cable Assembly & M-Drive En - Abicor Binzel M-Drive MFS-V3 Instructivo De Servicio

6 Putting into operation
6.2 Establishing connections
6.3 M-Drive & eBOX
Establish the connections as shown in the following diagram:
1
5
1 Port for control lead X46
Fig. 3 M-Drive &eBOX
6.4 MF1, cable assembly & M-Drive
Establish the connections as shown in the following diagram:
1 2
11
1 MF1 drive unit
2 Motor control lead
3 VTS cable assembly
Fig. 4 Standard & masterfeeder M-Drive
NOTICE
• Ensure that the coolant supply and return hoses have been correctly installed.
• We recommend using BTC-50 coolant; suitable for use at up to 50°C.
• To ensure the maximum cooling capacity, check the condition of the coolant regularly.
EN - 10
2
4
2 Port for control lead X11
3
10
4 Motor control lead
5 Air-blast hose
6 Coolant supply hose (blue)
Coolant supply = blue, coolant return = red
3 eBOX 4 Control lead
4 5 6
9
7 M-Drive
8 Coolant return hose (red)
9 Control lead for wire actual
value encoder
M-Drive
3
5 M-Drive
7
8
10 Wire inlet tube
11 Control lead for wire
actual value encoder