System Setup Step 1: Placing The System; Placement Guidelines - Bose Solo 15 Guia Del Usuario

System Setup
Step 1: Placing the system
1. Move your TV aside and turn it so you can see the Audio Out panel.
2. Place the Solo system where you had your TV.

Placement guidelines:

• The Bose Solo 15/10 system is designed to fit under TVs that weigh no more than
®
75 lbs (34 kg) and have bases no wider than 24" (61 cm), and no deeper than 12.25"
(31 cm).
• The base of your TV should be centered on the top of the system and must not
hang over any of its edges.
• If the TV base is too large to fit on top of the system, place the sound system in
another location such as on an open shelf under the TV, but keep it close to your
TV so the audio cable will reach. You can also mount your TV on the wall above
the system.
• If placing the sound system in a cabinet or on a shelf, position the front of the
system as close as possible to the front edge of the shelf for optimum audio
performance.
Cautions:
• DO NOT place a CRT type TV on this system. It is not designed for use with this
type of TV.
• Allowing the base of your TV to hang over any edge of this speaker system in-
creases the risk of the TV tipping, which may result in injury.
• If placing the sound system backed up to a wall, make sure there is a space of at
least 1" (2.5 cm) between the wall and the rear of the system.
• With any placement of this product, make sure the ventilation openings on the rear
panel are not blocked.
• If your TV comes with an anti-tip device, install it according to the manufacturer's
instructions and adjust the tether as instructed after placing the TV on top of the
system. Installing an anti-tip device is recommended when using a TV with this
product. If your TV did not come with an anti-tip device, you can get one from
most retail TV suppliers.
8 - English
TV Audio OUT panel