Descargar Imprimir esta página

ION EXPLORER EXTREME Guia Del Usuario página 5

Ocultar thumbs Ver también para EXPLORER EXTREME:

Publicidad

Idiomas disponibles

Idiomas disponibles

10. Tune/Track Buttons: Tap these buttons to tune in a radio station or go to the
previous/next track on a Bluetooth connected device. To "seek" (jump to the next
available station), hold either button down for a few seconds until it starts to seek a
station. The unit will remember the last station it was on and start at that station when
powered off and on again.
11. Display: Displays the current radio station, battery status, and Bluetooth status.
Charging Indicator:
When the power cable is connected, movement of the battery segments shows
o
the battery is charging. When fully charged, all battery segments will be lit without
blinking.
When the power cable is disconnected, the battery segment shows the level of
o
the battery.
When the battery level is low, the bottom battery segment will blink.
o
If a front panel button is not pressed within 60 seconds, the battery level indicator
o
will turn off (to save energy). The battery level indicator will reappear when any
button is pressed. Also, when the battery gets to the lowest battery icon segment,
the battery level indicator will turn back on.
Lightning Bolt Icon: The lightning bolt icon will illuminate when the power cable is
connected to wall power.
Bluetooth Icon: The Bluetooth icon will be lit solid when a device is paired to
Explorer Extreme.
Power Icon: The power icon will be lit when Explorer Extreme is powered on. The
power icon will not be lit when Explorer Extreme is powered off.
12. Master Volume Control: This adjusts the speaker's main mix volume, which includes the
Microphone Input, Auxiliary Input, Radio, and the audio of a paired Bluetooth device.
13. Microphone Input with Volume Control (1/4"): This mono input accepts a 1/4" (6.35
mm) input such as a microphone, guitar, or other musical instrument.
14. Auxiliary Input: This stereo 1/8" (3.5 mm) input can be used to connect a CD player,
MP3 player, or other audio source.
15. Speaker Link: Connect two or more Explorer Extreme's together using a 1/8" (3.5 mm)
stereo aux cable from the Speaker Link of one Explorer Extreme to the Aux Input of the
second Explorer Extreme.
16. USB Charging Port: Connect your device's charge cable here to charge it. USB charging
only functions when the unit's power is turned on.
Top Panel
1.
Cup Holders: Use these to hold
your drinks.
2.
Qi Wireless Charging: Place your Qi
compatible
wirelessly charge it.
smartphone
here
to
5

Publicidad

loading