Audio Setup - M-Audio UBER MIC Guia Del Usuario

Audio Setup

To set Uber Mic as your default recording and playback device, follow the directions below based
on your computer's operating system.
Windows:
1. Use the included USB cable to connect the Uber Mic to your computer.
2. In the Taskbar, locate the Volume Control "speaker" icon. Right-click it and select Playback Devices.
Alternatively, go to Start Menu > Control Panel (or Settings > Control Panel in Classic View) >
Hardware and Sound > Sound.
3. In the Windows Sound control panel, select the Playback tab and select M-Audio Uber Mic as
the default device.
4. Click the Recording tab and select M-Audio Uber Mic as the default device.
5. Click Properties in the lower-right corner.
6. In the new window, click the Advanced tab and select 2-channel, 16-bit, 48000 Hz (DVD Quality)
as the default format.
7. Uncheck both boxes under Exclusive Mode.
8. Click OK to close the Properties window.
9. Click OK to close the Sound control panel.
macOS:
1. Use the included USB cable to connect the Uber Mic to your computer.
2. Go to Applications > Utilities > Audio MIDI Setup.
3. In the Audio Devices window, select M-Audio Uber Mic in the left column.
4. Right-click or press Ctrl and click M-Audio Uber Mic, and select Use this device for sound input.
5. Right-click or press Ctrl and click M-Audio Uber Mic, and select Use this device for sound output
(to monitor the mic/computer signals through Uber Mic's headphone output).
6. Quit Audio MIDI Setup.
To set up Uber Mic with your software, open your software's Preferences, Device Setup, or
Options. This is an important step so that your audio software program can send and receive audio
from the Uber Mic. Please consult your software manual for more information.
6