Composite Video Output; Component Video Output; Subwoofer Output - THOMSON DS100i Manual De Instrucciones

TOWER WITH DOCKING for iPod and iPhone

ComPoSITE vIDEo ouTPuT

• Connect a RCA cable to the Composite Video Output
and a television.
• Power on the TV set and the unit.
• Adjust the connected television to the proper input
setting.
• Press vIDEo button repeatedly to switch between
Composite and Component video output modes.
• Video from a docked iPhone/iPod or the connected
DVD or the like can now be played through the unit to
the connected television.
Note: Make sure the docked iPhone or iPod's TV out option
is turned on.
TV
DS100i
CONNECTING WITH OTHER APPLIANCES

ComPoNENT vIDEo ouTPuT

The Component Video Output jacks only works at iPod
mode. It cannot output video from the A/V input.
• Connect a component video cable to the Component
Video Output jacks on the unit and a television.
• Adjust the connected television to the proper input
setting and make sure the docked iPhone or iPod's TV
out option is turned on.
• Press vIDEo button on the remote to switch to
Component video output modes.
• Video from a docked iPhone/iPod can now be played
through the bar speaker to the connected television.

SuBWooFER ouTPuT

The unit comes with a built-in subwoofer and allows you
to output the subwoofer signal to an external subwoofer
amplified.
• Use a RCA cable to connect the external amplifier with
a SuB INPuT jack to the SuB ouTPuT jack on the
unit.
TV
15 EN