Bellodigital BDS4012-40 Manual De Instrucciones página 9

• DRILL PILOT HOLES
plate to ensure you will not drill into any mortar joints. Tape the Installation Template in
place securely on the wall with masking tape. Use a Level. Carefully drill 4 holes using a
1/2" (or 12.5 mm) masonry drill bit Into holes A, B, C, D, Each hole should be at least
2.5" (63mm) deep.
Note: Each hole should be at least 5" apart.
hole on the bottom row of the wall bracket.
DO NOT DRILL INTO MORTAR JOINTS! DRILL HOLES AT LEAST 1" (25.4 MM) FROM
THE JOINTS. USE A NEW DRILL BIT TO ENSURE OPTIMUM HOLDING ABILITY. DO
NOT USE A HAMMER DRILL!
• Insert the anchors CC:
63mm
A316
mined your desired Sound Shelf location, Line up the Installation Tem
2.5
A
CC
CC
n Masonry
CC
CC
8
CC
CC
CC
bello-digital.com
CC