Art SpiderJack 3 Manual Del Usario página 25

info climb-ART.com @
EN
Inspection
This equipment may only be deployed if it is in perfect condition.
The functionality of this equipment must be checked by the user from a safety point of view
before and after every application. It is also important that no blind trust in the entire
safety-relevant equipment creeps in during deployment. Severe strain or any kind of
unusual occurrence may impair the faultless functioning of any kind of equipment.
This instruction manual contains a page with control data as well as a page for documenting
the inspection to be conducted at least once a year by a technical expert. The information
required for correct assessment of this equipment must be consistently entered during the
entire service life of the device.
Inspection criteria for the user and technical expert
- This device must be complete in accordance with the exploded assembly drawing;
- all screw connections must be complete and screwed tightly;
- all moving parts must be freely movable;
- all metal parts must be free from deformation, cracks and other damage;
- all textile components must be free from tears, cuts as well as contamination or abrasions
which permeate the structure.
- Wear and tear limits of replacable parts must be checked.
Servicing
This equipment does not require any particular servicing. It should, however, always be
cleaned thoroughly after use and dried if necessary in order to avoid dirt and dust deposits,
particularly on the moving parts, and to prevent corrosion.
The ART recommendation:
Cleaning and oiling the metal components, in particular the moving parts and their bearings,
using neutral oil such as Ballistol ensures smooth-running functionality and a lasting good
appearance.
Local safety assessment
A safety assessment must be performed of the climbing object and its surroundings before
deploying this device and the entire equipment. Any hazards determined must be consistently
eliminated.
25