Kodak EKTALITE E30 Instrucciones De Operación página 11

Lamp Replacement
5. Remove the used lamp from its socket.
6. Open the plastic sleeve. Keep the plastic sleeve on the lamp for hand
holding, and expose the lamp wires for socket connection.
IMPORTANT: Do not touch the new lamp directly. Finger oil and dirt can
shorten lamp life and performance.
7. Then install the new lamp lead wires into the socket. Close the LAMP
HOUSING COVER.
8. Replace the TOP COVER. Make sure it is locked in place.
9
KODAK EKTALITE E30/E31 OVERHEAD PROJECTORS
TOP COVER
LATCH