Checking The Hair Straightener And Package Contents; Operation; Before Straightening; Switching On/Off And Selecting A Temperature - Silk’n GoSleek IR Manual Del Usuario

Have the hair straightener checked and/or
EN
repaired by qualified technicians if necessary.
5. Checking the hair straightener and
package contents
NOTICE! RISK OF DAMAGE!
• If you are not cautious when opening
the packaging with a sharp knife or other
pointed object, you may quickly damage
the hair straightener. Be very careful when
opening it.
1. Take the hair straightener out of the packaging.
2. Check to make sure that the delivery is complete (see Fig. A).
3. Check whether the hair straightener or individual parts are damaged. If this is the
case, do not use the hair straightener. Contact our customer service.

6. Operation

•
•
6.1

Before straightening

• The hair should be clean, dry and free of styling products (except special
products that promote hair straightening).
• Thoroughly comb the hair so that there are no knots in it.
• Separate your hair into horizontal sections. Each section should be around the
width and thickness of a heating plate
Pin or clip the sections you are not working on out of the way.
6.2

Switching on/off and selecting a temperature

1. Connect the mains plug to an easily accessible socket.
2. Press and hold the control button
11
Clean all parts of the hair straightener before first use as described
in the chapter "Cleaning".
Before using the hair straightener for the first time, switch it on for
a few minutes and set it to the highest temperature. As a result of
the manufacturing process, you may notice a slight odour. This is
normal and only occurs during first use. Ensure that the room is well
ventilated.
.
1
to switch on the hair straightener. The
3