Use And Care Of Filter - Brita SAFF-100 Guia Del Usuario

STEP 4: Insert filter cartridge
into filter cup.
Support the bottom of the filter system
with one hand. Align the insert groove on
the lower part of the cartridge with the
filter replacement indicator at the front of
the filter cup. Insert the filter cartridge into
the filter cup. Lightly pull the filter back
out, making sure it is engaged. Do not
force the filter cartridge into the system
base. Inserting the new filter cartridge
automatically resets and activates the
filter replacement indicator.
STEP 5: Flush the new filter cartridge with water.
Move the filter handle toward you to the filtered Brita® water setting:

USE AND CARE OF FILTER

Your Brita® Faucet Filtration System is ready to use!
By adjusting the filter handle to the following positions, you can select between filtered
and unfiltered water.
FILTERED WATER
Move filter handle to upper position:
Filtered water can only be drawn from this filter
port. All other water is unfiltered.
Front View
Filter Cartridge
Turn on the faucet to flush the new filter for five minutes to remove
any carbon dust and activate the filter. It is normal for carbon dust to
appear. The 100-gallon/378-liter filter life begins after the five-minute
conditioning period.
NOTE:
Use with cold water only. Do not run hot water (above 100°F/38°C) through
the filter, as it may damage the filter.
4
Insert Groove
Filter Cup
UNFILTERED WATER
Move filter handle to lower position:
Draw water from unfiltered water outlet.
Filter Replacement Indicator