Printing Multiple Copies - Brother P-touch PT-18R Guía De Usario

LABEL PRINTING
2
Press the
The message shown on the right is displayed while
the label is being printed.
To stop printing, press the
• When the battery is low the message "Recharge Battery!" appears after printing. Recharge the
battery before continuing printing, or connect the AC adapter directly to the P-touch to
continue printing.
• There are several other messages that may appear when you press the
Messages" on page 58 and check the meaning of any messages that appear.

Printing Multiple Copies

Using this function you can print up to 99 copies of the same label.
1
Make sure that the appropriate tape cassette is inserted and ready for printing.
2
Hold down the
display the print options screen, and then select
"Copies" using the
3
Press the
then select the number of copies to be printed using
the or
number keys.
Hold down the
copies in increments of 5.
4
Press the
The message shown on the right is displayed while
the labels are being printed.
• Press the
• Unless set otherwise, the tape is automatically cut after each copy is printed. Refer to "Tape
Cutting Options" on page 47 to change this setting.
• The figures shown on the screen during printing indicate the "count / number of copies set".
• Pressing the
default.
44
Printing a Label
key.
key to turn off the P-touch.
key and press the
or keys.
key to display the Copies screen, and
keys, or type the number using the
or keys to change the number of
key.
key to return to the previous step.
key when setting the number of copies resets the value to 1, the
key to
key. Refer to "Error