Technical Specifications - Signal POWER STATION 4 Guía De Usuario

Technical specifications

AC adapter input: 100-240 Volts
Setting up Power Station 4
1. Gently insert the female side of the included power cord into the
back of the Power Station 4.
2. Gently insert the other end of the power cord into an AC
power outlet.
3. The LED power indicator on the top of the Power Station 4 will
light up when powered on.
Charging specifications
1. Power Station 4 charges most devices with a 5V USB charge cable.
2. If you plug in a device which requires more than the current
indicated for the chosen USB port, Power Station 4 will automatical-
ly shut off for safety purposes. If this occurs, unplug the USB cable
from the Power Station 4 and plug into a USB port which provides
the proper amount of power for your device.
Troubleshooting
Issue: My Power Station 4 will not turn on.
Solution: Verify the following:
• The power cord is fully inserted into the back of the Power Station 4.
• There is no dirt or debris on the prongs of the power cord.
• The power outlet has power.
Issue: My Power Station 4 will not charge my devices.
Solution: Verify the following:
• The power cord is fully inserted into the back of the Power Station 4.
• The device to be charged requires 5V.
• The devices being charged simultaneously do not require more
than 6.5 Amps total.
• The USB port you are plugged into has enough power to power