RugDoctor 93140 Serie Manual Del Usuario página 9

CLEANING UPHOLSTERY, STAIRS AND
STAINS, USING THE UPHOLSTERY TOOL
SETTING UP/GETTING READY TO CLEAN (CONT)
Your RUG DOCTOR DEEP CARPET CLEANER is ready to start cleaning right
out of the box. No assembly required! Follow these simple instructions to
start cleaning.
3. Fill the CLEAN WATER TANK:
c. Fill the tank with hot tap water to the "CLEAN WATER FILL LINE".
DO NOT USE BOILED OR MICROWAVED WATER IN TANK.
d. The TANK LID is also the "Soap" measure. Fill the lid with Rug
Doctor cleaning solution to the desired level (measured in ounces).
Follow instructions on the cleaning solution bottle for best results.
(Fig. 20)
e. Pour the cleaning solution into the CLEAN WATER TANK and replace
the lid. Turn clockwise to tighten.
f. Place the CLEAN WATER TANK back in the machine, making sure
it is secure.
4. Rotate the CORD WRAP HOOK on the handle to release the power cord.
Unwrap the POWER CORD and plug in to a grounded outlet. Making sure
the POWER SWITCH is in the "OFF" (middle) position. (Fig. 21)
DO NOT USE BOILED OR MICROWAVED WATER IN TANK. Doing
so could result in scalding or burns. Not recommended for use on
wool, jute, sisal carpets and rugs. Doing so could damage material
and void warranty on machine. Do not walk on wet carpet.
HOW TO CLEAN / FEATURES
CLEANING WITH THE UPHOLSTERY TOOL
You're now ready to deep clean your upholstery, stairs and carpet spots and
stains. Your RUG DOCTOR DEEP CARPET CLEANER has an UPHOLSTERY
TOOL and innovative TOOL CADDY. Designed to easily snap on and off back of
the machine handle, the UPHOLSTERY TOOL CADDY hangs on a hook or peg
when not in use. Simply snap the TOOL CADDY on-board to store the whole
machine in one convenient and compact package.
1. Unwrap the UPHOLSTERY TOOL from the CADDY. (Fig. 22)
2. Open the WASTE WATER PORT by pulling on the black
rubber plug out. (Fig. 23)
3. Insert the UPHOLSTERY TOOL connection into the WASTE WATER PORT
on the front of the WASTE WATER TANK by lining up the "O" icons on the
tank and the TOOL. (Fig. 24)
4. Lock the TOOL into place by rotating to the right, the
straight up. (Fig. 25)
5. Connect the SOLUTION HOSE to the "TOOL CLEAN PORT" located on the
top of the machine. (Fig. 26)
rugdoctor.com 1-800-784-3628
icon will be
9
(Fig. 20)
(Fig. 21)
(Fig. 22)
(Fig. 23)
(Fig. 24)
(Fig. 25)
(Fig. 26)