2. Tempered Glass shelves
To remove - Tilt up the front of the shelf in the direction
shown ( 1 ) and lift it up vertically ( 2 ). Pull
the shelf out.
To relocate - Tilt the front of the shelf up and guide
the shelf hooks into the slots at a desired
height. Then lower the front of the shelf
so that the hooks can drop into the slots.
The Tempered Glass shelves are heavy.
Use special care when removing them.
CAUTION
2
3. Vegetable & Fruit Drawers
•
After pulling out completely the vegetable pan,
take it out by lifting up the front and pull it forward.
•
To remove the shelf of the vegetable pan, press
the button on the left side of the shelf while you
are lifting it. Pull it out slowly.
Reassemble in the
inverse order of
CAUTION
the disassembly.
The assembly is
completed when you
hear a "Click".
20_ operating
DA68-01922A.indb 20
DA68-01922A.indb 20
1
Rounded up while
Rounded up while
pressing the button
pressing the button
Button
Button
4. Flex Zone
To remove the Flex Zone – Pull the Flex door out to
full extension. Lift the Flex
Zone up, pulling it to your
body with both hands.
To relocate the Flex Zone – Open the Flex door to full
When the Flex Zone or LED lighting are not
working, check the connectors [ ( 1 ), ( 2 )
shown below] for cracks or leaks.
extension. Tilt the front of
the Flex Zone up, place
the back of the Flex Zone
onto the rails, and then
lower the front until the
whole Zone rests on the
rails.
2
1
2013.3.4 1:33:26 PM
2013.3.4 1:33:26 PM