Re-Attaching The Refrigerator Doors - Samsung RF31FM Manual De Usuario

RE-ATTACHING THE
REFRIGERATOR DOORS
To reattach the fridge doors after you have moved
the fridge to its fi nal location, assemble the parts
in reverse order.
1. The Water Line must be fully inserted into the
center of the transparent coupler (Type A)
or the Guide Lines (Type B) to prevent water
leakage from the dispenser.
2. Insert the clip in the install pack and check that
it holds the line firmly.
Type A Type A
Center of Transparent coupler Center of Transparent coupler
clip A (1/4") clip A (1/4")
(6.35 mm) (6.35 mm)
DISASSEMBLING THE FLEX
DOOR
1. Take out the Flex Zone ( 1 ) by lifting it up.
2. Take off the cover ( 2 ) w/harness with a flat-
blade screwdriver (-).
2
12_ setting up
3. Press the locking tab and separate the Wire
Type B Type B
4. Remove 1 hex head bolt from each side with a
Dispenser Dispenser
The Guide Lines The Guide Lines
clip A (1/4") clip A (1/4")
(6.35 mm) (6.35 mm)
5. Lift up the Flex door from the rails.
1
Connector.
When reassembling it, be sure to connect
the wire harness.
CAUTION
If it is not connected, the Flex Room does
not work.
socket wrench (10mm).
Putting too much food into the freezer
drawers can prevent the freezer from
CAUTION
closing completely and can cause frost
build-up.