Introduction
Congratulations and thank you for your purchase of the Radius Series loudspeakers.
We are confident they will provide years of enjoyment and pleasure as only high quality
components have been used throughout.
Please follow this user manual carefully as it contains important information about positioning
and set up procedures. For further advanced information please refer to our web site at:
www.monitoraudio.com
The Radius 45 incorporates a thermal protection device, which helps to protect
the drive unit and tweeter from permanent damage. If the speaker stops working
after a long period of play, turn off the source for about 10 minutes, and retry.
Set Up and Positioning
Although position and suitability will have been considered prior to purchasing these
loudspeakers, this section will guide optimum positioning and set up (an illustration is
provided on page 4 to assist with positioning). For instructions on fitting the Radius 225 or
Radius One to a wall, please refer to page 5. The Radius One features fixings compatible
with a Sanus Wall Bracket.
NOTE: The Radius 45 and 90 can be fixed to a wall using our Universal Speaker Mount
sold seperately. The Radius 200 is not designed to be wall mounted.
Self adhesive rubber feet are provided to prevent movement due to vibration when using
the Radius Series loudspeakers on a table/ equipment stand. The Radius 270 comes
supplied with rubber feet fitted into the plinth for use on hard floors. Further details on these
can be found on page 10.
Radius One
The Radius One can be placed either just below or just above your TV/ projector screen. It
can be wall mounted with the supplied bracket (refer to page 5), or alternatively using the
Sanus VMA202 Soundbar Speaker Mount. refer to www.sanus.com for further information.
Radius 200
The Radius 200 is the range's first dedicated centre speaker, and is designed to be placed
on a shelf or cabinet.
2
Radius Series