Listening To The Radio - AEG SRP 4342 Instrucciones De Servicio

Máquina de sonido
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 26
1. Flip the cover downwards.
2. Please connect the external device via 3.5 mm plug jack
to the AUX IN jack.
3. Now select AUX mode with the MODE button (19 on the
device) or with the AUX IN button (3 on the remote).
4. You will hear the sound playback through the speakers.
You can adjust the volume with the VOLUME control (3)
or the VOLUME +/- buttons (10 on the remote). The CD
buttons are not active.
5. For further functions please refer to the user manual of
the external audio device.
NOTE:
Set the volume of the external device to a proper audible
level.
Always keep the cover closed when not in use.
USB port (13)
This device has been developed in line with the latest techni-
cal advances in the USB field. The wide range of different
USB storage devices of all types which are currently on the
market, unfortunately do not allow us to guarantee full com-
patibility with all USB storage devices. For this reason, in rare
cases there may be problems in playing back files from USB
storage devices. This is not a malfunction of the device.
1. Flip open the cover.
2. Press the MODE button (19 on the device) or the CD/
USB/SD button (17 on the remote) until "USB" appears in
the display.
3. Directly connect a USB storage medium to the respec-
tive port. READING appears on the display. After a few
seconds, the total number of folders and the title will be
shown for a short time. Playback then begins. The cur-
rent folder (e.g. 01), the current song (e.g. 005), and the
elapsed play time will be shown in the display.
NOTE:
Always directly connect a USB storage medium to the
USB port to prevent any malfunctions.
For the operation, please follow the section "Play CDs/MP3".
Always keep the cover closed when not using it.
CAUTION:
Before you remove the USB memory medium, switch the
device to Radio operation.
Memory card slot (11)
1. Flip open the cover.
2. Press the MODE button (19 on the device) or the CD/
USB/SD button (17 on the remote) until "CARD" shows
in the display.
3. Insert the memory card into the intended opening until it
audibly locks in with a "click". Thereby the contacts need
to point downward. READING appears on the display.
After a few seconds, the total number of folders and titles
will be shown for a short time. Playback then begins. The
current folder (e.g. 01), the current song (e.g. 005), and
the elapsed play time are shown in the display.
For operation, please refer to the section "Play CDs/MP3".
Always keep the cover closed when not using it.
CAUTION:
Before you remove the memory card, switch the device to
Radio operation.
Press on the end of the memory card to remove it again.

Listening to the radio

Searching for stations
1. Repeatedly press MODE button (19 on the device) until
the display shows "TUNER". Or press the FM button (2)
on the remote control.
2. Use the / buttons (9/8) to tune in the desired station.
3. The FM.ST control lamp ((ST)) (in the display) will light up
when the selected station is received with stereo quality.
If reception is too poor and the station experiences static,
the control lamp will flicker. Try to improve the reception
by changing the position of the telescopic antenna. For
FM stations you may use STOP / FM MONO/ST button
(9 on the remote) to switch between MONO and STE-
REO reception. In case of poor reception we recommend
switching to MONO mode.
Saving/Selecting Stations
4. When you have found the desired station, press the
PROG button (10/4). MEMORY will light up in the display
and the memory position will flash.
5. To select the programming channel, press the PRESET
button (5 on the remote).
6. Press PROG to save the settings.
To chose a stored channel, press the PRESET button (5 on the
remote).
Playing CDs/MP3
This is how to play a CD
1. Repeatedly press MODE button (19 on the device) until
the display shows "CD". Or press the CD button (16) on
the remote control.
2. Open the CD tray (1) by rotating the lock (2) to the left in
the OPEN direction.
3. Insert the audio CD onto the conical spindle with the
label facing upwards, so that it snaps into place me-
chanically. Then close the CD compartment cover again.
Rotate the lock (2) to the right in the LOCK direction.
English
43

Publicidad

Tabla de contenido
loading

Tabla de contenido