Properties; Intended Use; Possible Incorrect Use; Accessing The Unit - Oase BioTec ScreenMatic2 Serie Instrucciones De Uso

Ocultar thumbs Ver también para BioTec ScreenMatic2 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 67
- EN -
 B, C
BioTec ScreenMatic² 40000/60000/140000
1
Inlets, 2 x
2
Water distributor
3
Distributor extension
4
Brush for regularly cleaning the ScreenMatic screen
5
Substrate tube
– BioTec ScreenMatic² 40000:
– BioTec ScreenMatic² 60000:
– BioTec ScreenMatic² 140000:
6
Separating plate
– can be removed from the BioTec ScreenMatic² 40000/60000 for maintenance purposes.
7
Foam filter
– BioTec ScreenMatic² 40000/60000:
– BioTec ScreenMatic² 140000:
8
Blind plug for closing the outlet (13)
– Closing the outlet before cleaning the foam filters prevents dirty water from flowing back into the pond.
9
Dirt outlet
10
Dirt outlet slide valve
11
Debris tray
12
Outlet
3.2

Properties

• High performance flow-through filter for ponds up to 40 m
• Electrically driven ScreenMatic rotating screen for automatic removal of coarse debris.
• Low-maintenance filter due to the automatic removal of coarse debris.
• Bottom dirt outlet with slide valve for removal of dirt/debris from the filter system.
• Convenient cleaning of the foam filters directly inside the filter.
• Perfectly tailored to the OASE AquaMax Eco filter pumps.
• Direct connection of the OASE UVC clarifiers of the Vitronic 18W/24W/36W, Bitron C and Bitron Eco series
possible.
• Use of different filter media to ensure optimum colonisation of bacteria for biological filtration.
3.3

Intended use

BioTec ScreenMatic² 40000/60000/140000, referred to in the following as "unit", may only be used as specified
in the following:
• For cleaning garden ponds.
• Operation under observance of the technical data.
3.4

Possible incorrect use

The following restrictions apply to the unit:
• Only operate with water at a water temperature of +4 °C to +35 °C.
• Never use the unit to convey fluids other than water.
• Do not use for commercial or industrial purposes.
• Not suitable for salt water.
• Never run the unit without water.
• Do not use in conjunction with chemicals, foodstuff, easily flammable or explosive substances.
3.5

Accessing the unit

• Remove the container cover: Access to the control device.
• Hinge up the screen holder: Access to the foam filters, substrate tubes, separating plate and outlet.
28
2 x
3 x
12 x
8 x
18 x
3
3
3
, 60 m
or 140 m
.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Biotec screenmatic2 40000Biotec screenmatic2 60000Biotec screenmatic2 140000

Tabla de contenido