Textron Greenlee FI-100 Manual De Instrucciones

INSTRUCTION MANUAL
FI-100
Optical Fiber Identifier
Read and understand this material before operating or
servicing this equipment. Failure to understand how
to safely operate this tool could result in an accident
causing serious injury or death.
Register this product at www.greenlee.com
52068115 REV 3 © 2014 Greenlee Textron Inc.
Description
The Greenlee Communications FI-100 Optical Fiber Identifier can
quickly identify the direction of transmitted fiber and display the relative
core power without interrupting the current service. The FI-100 detects
modulations of 270 Hz, 1 kHz, and 2 kHz with an audible tone and LED
indication.
There are four adapter heads available: ø 0.25, ø 0.9, ø 2.0, and ø 3.0.
This tool is powered by two AAA alkaline batteries.
Package Contents
1 Optical fiber identifier
1 Set of adapter heads (250 µm, 900 µm, 2 mm, and 3 mm)
2 AAA batteries
1 Instruction manual
1 Soft carry bag
1 Sun shield
Safety
Safety is essential in the use and maintenance of Greenlee tools and
equipment. This instruction manual and any markings on the tool
provide information for avoiding hazards and unsafe practices related to
the use of this tool. Observe all of the safety information provided.
Purpose of This Manual
This instruction manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the Greenlee
Communications FI-100 Optical Fiber Identifier.
Keep this manual available to all personnel. Replacement manuals are
available upon request at no charge at www.greenlee.com.
Important Safety Information
Electric shock hazard:
Contact with live circuits could result in severe injury
or death.
Wear eye protection when using this tool.
Fiber fragments can be extremely dangerous if they
come into contact with eyes or skin or are ingested.
• Do not disassemble or lubricate. Contact Greenlee for
maintenance and repairs.
• Store in a dry, clean location in the protective pouch.
Failure to observe these precautions may result in injury and may
damage the unit.
EN 5/14
Specifications
Specification
Identified Wavelength Range 800 to 1700 nm
Identified Signal Type CW, 270 Hz ±5%, 1 kHz ±5%, 2 kHz ±5%
Detector Type 1 mm InGaAs
ø 0.25 (applicable for bare fiber)
ø 0.9 (applicable for ø 0.9 cable)
Adapter Type
ø 2.0 (applicable for ø 2.0 cable)
ø 3.0 (applicable for ø 3.0 cable)
Signal Direction Left and right LED
-46~10 dBm (1310 nm)
Signal Direction Test Range
(CW/0.9 mm fiber)
-50~10 dBm (1550 nm)
Signal Power Test Range
-50~+10 dBm
(CW/0.9 mm fiber)
Signal Frequency Display 270 Hz, 1 kHz, 2 kHz
ø 0.9, ø 2.0,
ø 3.0
Tone Detect Test Range
(average)
ø 0.25
0.8 dB at 1310 nm
Insertion Loss (typical)
2.5 dB at 1550 nm
Battery AAA (2) alkaline
Operating Temperature -10 to +60 °C
Storage Temperature -25 to +70 °C
Dimensions 196 x 30.5 x 27 mm
Weight 195 g
Certifications WEEE, CE, FCC
All specifications are nominal and may change as design improvements occur.
Greenlee Textron Inc. shall not be liable for damages resulting from misapplication or misuse
of its products.
KEEP THIS MANUAL
FI-100
-30~0 dBm (270 Hz, 1 kHz)
-25~0 dBm (2 kHz)
-25~0 dBm (1 kHz, 2 kHz)
-20~0 dBm (2 kHz)