M-Audio HAMMER 88 PRO Guia De Inicio Rapido página 2

Quickstart Guide (English)
Introduction
Box Contents
Hammer 88 Pro
USB Cable
Music Rest
Software Download Card
Quickstart Guide
Safety & Warranty Manual
Support
For the latest information about this product (system requirements, compatibility information, etc.)
and product registration, visit m-audio.com.
For the full User Guide, visit m-audio.com.
For additional product support, visit m-audio.com/support.
Setup
To connect Hammer 88 Pro to your computer, use the included USB cable. Plug the USB-B end
of the cable into the keyboard and the USB-A end of the cable into your computer (or into a USB
hub connected to your computer).
Note: In addition to sending data, the USB cable powers the keyboard. If you will be connecting
Hammer 88 Pro to a USB hub that has other devices connected to it, then we recommend using a
powered USB hub.
To configure your DAW to work with Hammer 88 Pro, enable Hammer 88 Pro as a MIDI control
surface in the appropriate settings menu within the DAW (Preferences, Options, Device Setup,
etc.).
If you will be using Hammer 88 Pro with the included MPC Beats, Pro Tools | First M-Audio
Edition, or Ableton Live Lite software, see Installing Your Included Software for more specific
instructions on configuring your DAW with Hammer 88 Pro. If you will be using a different DAW,
consult the user manual provided with the DAW for additional help with this step.
If you will be using Hammer 88 Pro with a hardware synth rather than your computer, connect
Hammer 88 Pro's MIDI Out port to a synth with a standard 5-pin MIDI cable. Then make sure that
Hammer 88 Pro is set to operate with one of its custom presets selected (as instructed in Setting
the Keyboard's Operation Function) and that the Hammer 88 Pro is set to send MIDI data from the
5-pin MIDI out port in the Global Settings. In order to use an external hardware synth, you will need
to connect Hammer 88 Pro to a computer, laptop, or to a powered USB hub.
2