Installing The Projector On The Wall Mount; Adjusting The Length Of The Arm; Connecting The Power Cable And Other Cables To The Projector - Epson ELPMB24 Manual De Instalación

4. Installing the projector on the wall mount

1) Slide the projector plate onto the adjustment unit as shown below.
2) Secure the projector temporarily using two M4
M4 × 12 mm hexagon socket
head cap bolt (2 pcs)
washer (2 pcs.)
Mark
Projector plate

5. Adjusting the length of the arm

1) Loosen the screw on the arm. (
2) Adjust the length of the arm using the measure on the bottom to match the projection distance recommended in "Screen
Size and Projection Distance" on page 6. (
3) Secure the arm position temporarily using the screw on top. (

6. Connecting the power cable and other cables to the projector

×
12 mm bolts as shown below.
Adjustment unit
)
)
)
9