Using The Device; Troubleshooting; Storing The Device; Cleaning And Maintenance - Kampa SabreLink 30 Instrucciones De Montaje Y De Uso

Add-on kit
➤Proceed as shown (fig. 8, page 5).

Using the device

Before first use
1. Remove the plastic tab from the remote con-
trol's battery.
2. Pair the remote control to the remote receiver
(fig. 0, page 5).
Switching on and off
➤Proceed as shown (fig. 9, page 5).
Dimming the light
➤To dim the light continuously, proceed as
shown (fig. a, page 5).
➤To dim the light in percentage steps, proceed as
shown (fig. b, page 5).
Changing the battery of the remote
control
!
WARNING!
Keep batteries away from children.

Troubleshooting

Fault
The remote control does
not work.
8
Possible cause
The plastic tab that isolates the battery has
not been removed before first use.
The battery of the remote control is empty. Replace the battery with a battery of the
The remote receiver is placed within a
metal enclosure or another closed-off loca-
tion and therefore the RF wireless signal is
compromised.
The remote control is not paired to the
remote receiver correctly.
➤Replace the battery with a battery of the same
type (3 V CR2025, see fig. 4, page 4).

Storing the device

➤Store the device in a clean, dry and dust-free
space.

Cleaning and maintenance

!
WARNING! Electrocution hazard
Unplug the device from the power sup-
ply before cleaning and maintenance.
A
NOTICE!
• Never clean the device under running
• Do not use sharp or hard objects, abra-
➤Occasionally clean the device with a soft, damp
cloth.
4445103371
water or in dish water.
sive cleaning agents or bleach during
cleaning as these can damage the
device.
Solution
Remove the plastic tab.
same type (see chapter "Changing the bat-
tery of the remote control" on page 8).
Place the remote receiver away from any
metal enclosure or closed-off locations.
Pair the remote control to the remote
receiver (see chapter "Before first use" on
page 8).