JB Systems DJ-Kontrol 3S Manual De Instrucciones página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 42
ENGLISH
FUNCTIONS (MIXER)
1. TRACK SELECT knob: turn this knob to scroll up or down in
the folders, browser or music library.
 Press shortly: to select the folder or file.
 Press for 0,5sec: to enlarge/shrink (zoom) the browser.
2. LOAD A/C button: press this button to load the selected track
to left player (A or C) of the software.
3. LOAD B/D button: press this button to load the selected track
to right player (B or D) of the software.
4. BACK button: this button allows you to return to a higher level
in the folder/browser structure.
5. GAIN knob: turn this knob to adjust the gain of the
corresponding channel.
6. HIGH knob: used to adjust the high frequencies of the
corresponding channel. Press the knob to toggle the KILL-
function on/off.
7. MIDDLE knob: used to adjust the middle frequencies of the
corresponding channel. Press the knob to toggle the KILL-
function on/off.
8. LOW knob: used to adjust the low frequencies of the
corresponding channel. Press the knob to toggle the KILL-
function on/off.
9. CHANNEL FADER: adjusts the volume of the corresponding
audio channel.
10. MIC VOLUME: used to adjust the sensitivity of the DJ-
microphone.
11. MIC INPUT: 6.3mm input jack to connect your DJ microphone.
12. CROSSFADER: with this fader you can mix over between both
channels. The crossfader only works when you move the
channel faders (9) of both channels to the desired level!
13. CROSSFADER CURVE: used to choose a soft or hard curve
for the crossover. This depends on your personal taste.
14. CUE MIX: With this knob you can select / mix the input channels to the headphone output:
 Put the knob in the extreme left position to hear the PFL signals of the players A/C.
 Put the knob in the extreme right position to hear the PFL signals of the players B/D.
 Put the knob in any other position to hear a mix of the two signals.
This option makes it possible to check your mix before you put it on the master output.
15. CUE VOLUME knob: used to control the output level of the headphone channel.
16. PHONES OUTPUT: connect your headphones here for monitoring of your tracks.
17. DECK SELECT button A/C: press this button to select which player your left controller should command
(in 4 deck mode).
18. DECK SELECT button B/D: press this button to select which player your right controller should
command (in 4 deck mode).
19. MASTER VOL knob: used to set the volume of the master output.
FUNCTIONS (PLAYERS)
20. SET CUE button: sets the track at the desired location. It also sets the audio to the last set cue
position. Keep the button pressed to preview the cue point until the button is released.
21. CUE PLAY button: starts playing the track from the last set cue position.
22. PLAY PAUSE button: used to start/stop playback of the loaded track.
23. JOG WHEEL: its function depends on the selected play mode:
 In pause mode: the wheel allows you to set a cue point or starting point very precisely.
JB SYSTEMS
®
6/58
USER MANUAL
DJ-KONTROL 3S

Publicidad

Tabla de contenido
loading

Tabla de contenido