Publicidad
Idiomas disponibles
Idiomas disponibles
C-LOGIC 350
INSTRUCTION MANUAL
Comprobador de tensión
Introduction
The Voltage Tester provides a simple and fast method of
testing AC and DC voltage up to 400 volts. The different
indicating signals of the Voltage Tester are not to be used
for measuring purposes, it only means a voltage range,
not the exact value. For example, when 120V indicator
lights up, the measured voltage is in the range of 120V, it
meant that the measured voltage value may be 120V, may
be less than 120V, may also be greater than 120V.
Warnings
• Read, understand and follow the Safety Rules and
Operating Instructions in this manual before using this
instrument.
• The Voltage Tester is designed to be used by the skilled
persons and in accordance with safe methods of work.
• If the equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment
may be impaired.
• Unauthorized persons are not to be allowed to
disassemble the tester.
• Keep fingers away from the metal probe tips when taking
measurements.
• Comply with all safety codes. Use approved personal
protective equipment when working near live electrical
circuits.
• Use caution on live circuits. Voltages above 30V AC RMS,
42V AC peak, or 60V DC pose a shock hazard.
• Do not use if the instrument or test leads appear
damaged.
• Measure known voltage with the tester to verify that the
tester is working properly. If the tester is working
09
abnormally, stop using it immediately. A protective device
may be damaged. If there is any doubt, please have the
tester inspected by a qualified technician.
• Do not use the tester in wet or damp environments or
during electrical storms.
• Do not use the tester near explosive vapors, dust or
gasses.
• Do not use the tester if it operates incorrectly. Protection
may be compromised.
• Do not apply voltage that exceeds the tester's maximum
rated input limits.
Input Limits
Function
Maximum Input
Voltage DC, Voltage AC
400V
Maintenance
1. KEEP THE TESTER DRY. If it gets wet, wipe it off.
2. USE AND STORE THE TESTER IN NORMAL
TEMPERATURES. Temperature extremes can shorten
the life of the electronic parts and distort or melt plastic
parts.
3. HANDLE THE TESTER GENTLY AND CAREFULLY.
Dropping it can damage the electronic parts or the case.
4. KEEP THE TESTER CLEAN. Wipe the case occasionally
with a damp cloth. DO NOT use chemicals, cleaning
solvents, or detergents.
10
Voltage Tester Description
1.E xternal test probe (-)
2.I nstrument test probe (+)
3.L EDs for voltage display
4.P rotection ring
1
2
4
400
3
230
120
50
24
12
4
OVC I I I
400V
50/60 Hz
IP 54
CAT III
400V
Keep your fingers behind the protection ring when
measuring.
11
Publicidad
