Philips HP6427/PB Manual Del Usuario página 9

- Move the appliance slowly over the skin, against the direction of the hair growth
(fig. 12).
• It can be nice to cool the skin after use with a cloth soaked with water.
Cleaning
• For a good and smooth result in epilating, it is essential that the epilating head is
cleaned after each use.
• Never immerse the appliance in water.
The pain softener element can be removed and washed or rinsed separately.
• Do not use strong cleaners or scouring agents, petrol, acetone, etc., to clean the
plastic housing of your Satinelle Sensitive BodyTotal.
• Never try to remove the epilating discs from the appliance.
- Ensure that the appliance is switched off (fig. 13, 14).
- Remove the mains plug from the wall socket (fig. 21).
- Remove the precision cap (fig. 22).
- Brush the epilating discs clean (fig. 23).
- Take off the pain softener element (fig. 16).
- Wash the rubber tips using the brush (fig. 24).
- Put the pain softener element back ("Click!") (fig. 25).
Protecting the environment
When you wish to discard the appliance in due course:
- Pull the mains plug out of the wall socket and let the appliance run until the
batteries are empty.
- Take off the pain softener element (fig. 16).
- Use a small screwdriver to open the appliance (fig. 26).
- Remove the battery holder with the built-in batteries (fig. 27) and hand them in at
one of the officially assigned battery collection points. (Depot for domestic
chemical waste.)
You may recognize NiCd type batteries by the print ı r (fig. 28) and NiMH type
batteries by the print NiMH (fig. 29).
Do not connect the appliance to the mains supply after the battery has been
removed.
- Put the motor and the metal parts into a metal waste container.
- With a view to recycling, all plastic parts have been provided with identification
marks. These parts should be disposed in the appropriate containers for
recyclable waste.
• Please note: You can also take the appliance to a Philips Service Centre. The staff
will be happy to help you.
9