Tornado 97130 Manual De Operaciones Y Mantenimiento página 11

To replace the light bulb.
1. Unplug the vacuum.
2. Insert a flat tipped screwdriver into slot A and remove light lens.
3. Grasp bulb and pull out. Discard old bulb and replace with new one.
4. Replace light lens.
Troubleshooting
Vacuum cleaner won't run.
Possible Causes
Vacuum Cleaner is not plugged in
Household fuse/circuit breaker tripped
Vacuum cleaner won't pick up dirt.
Possible Causes
Dust Bag is full
Drive Belt not functioning
Rotating Cleaning Brush bristles worn
Rotating Cleaning Brush jammed
Dust Tube is clogged
Accumulation of dust inside Cloth Bag
Possible Cause
Dust Bag is clogged or dirty
Dust Bag collar retainer not secure
Inlet clogged
Remedies
Check power Source Plug and Connector Plug
Check/replace fuse – Reset breaker
Remedies
Replace with new Dust Bag
Realign Drive Belt or replace if damaged
Replace Rotating Cleaning Brush
Remove Rotating Cleaning Brush and clean de-
bris from brush ends; Reinstall Drive Belt
Clean Dust Tube
Remedies
Replace with new Dust Bag
Secure Dust Bag collar retainer
Shake dust down to bottom of Dust Bag.
11